got my dash 2 fitted, and rad fan waring light.

finally got round to fitting my race technology dash 2 and radiator fan warning light.
the mnr scuttle is a funny shape and the dash 2 would not mount to it directly so i riveted a carbon effect sheet to the scuttle to take away some of the original scuttles double curve. this enabled me to mount my dash 2 square on,with no gaps around the edges. also put an illuminated warning for the radiator fan to stop me leaving it on.when the engine is running its very loud ands therew is no chance of hearing if the fan is on so the illuminated symbol should let me know to turn it off in case i forget!
i have also covered the pannel in edge trim to make sure its IVA ok, even though its in the exempt radius area behind the stgeering wheel

hybrid drive shafts fitted

finally got my hybrid drive shafts back from driveline, and fitted to the car. absolutely stunning job they did in making these shafts,as im using a honda s2000 differential and ford sierra rear hubs. i had 4x complete shafts (2x honda,2x sierra) and gave them measurements.the end result is spot on and they fit perfectly

brake fluid resevoir,filler unions and clutch cable done

i have bought some nice brake fluid filler unions and IVA proof hoses as my last ones were leaking from a seal. bought 2x 7/16" male to male unions to screw into wilwood cylinder and 2x adonised filler unions to screw it them, easy job and look really tidy too! and no leaks which is a bonus
akso dobne my clutch cable which i got from HEL performance.in yellow. p-clipped to chassis rails and connected to master cylinder and clutch slave