i have also managed to fit the near side rear wheel arch. i held it in position at first but was struggling to hold it up and mark fixing positions. i drilled a series of holes in the inside edge of the arch and luckily in the garage,there was a tub of grease which when sat on the rear wheel acted as a perfect guide and gave a perfect even spacing around the wheel! (who would have thought a tub of grease could be so handy.) once it was in position i drilled through the inner arch and through the side of the main body tub. then i removed the arch and inserted the 5mm riv-nuts into the pannel. then i offered the arch up to the pannel and fastened it with m5 bolts. making sure the wing piping was in position.
once the arch was fitted i decided to fit the rear light cluster. i drilled and grommeted the rear pannel for the wire and connecor plug to pass through, and drilled and fixed the cluster back using long m5 bolts with nuts and washers
No comments:
Post a Comment