as the original oil filter fouled the steering shaft, i had to buy a mocal remote filter kit, i made a bracket from 3mm alloy and bolted it to a pannel which was welded to the chassis. i fit the take off plate to the original filter outlet and connected the aeroquip hoses as per instructions. these are very good hoses and are a very tight fit. first you have to put the hose ends into boiling water to slightly slacken the hose ends. then quickly push the hose ends onto the outlets. once they cool down they seal very tight so i will be anxiously awaiting the results once the oil systam is pressurised!
i have also upgraded the oil lines to hel performance braided with adonised fittings
No comments:
Post a Comment