day 3 was fitting all 8 wishbones which first meant greasing all suspension bushes and fitting them into the wishbones.with the bushes in place,the bolts could be passed through the brackets,with a washer on each end and tightened up, using nyloc nuts!
once the wishbones are in place, the front shocks can be mounted. these need bolting through the suspension rockers with washers and side spacers and then bolting through lower suspension mounts,again with side spacers and washers. the rockers then needed mounting to their brackets with 2 small washers and a thrust bearing washer each side to allow for movement.
No comments:
Post a Comment