I have squared up the rear fog light with an L-shaped alloy bracket and for IVA purposes, i have made a surround,again from alloy and covered with edge trim.
i have also fit the IVA friendly side markers to the outer edge of the front arch, these are a recessed flush fit and require a 20mm hole, i drilled them into the arch first,then drilled a 10mm hole into the bottom of the wingstay bracket and fed the wiring through the inside of the bracket insde a flexible wiring conduit. i then fixed some cable tie bases to the lower wishbone and cable tied the wiring and conduit to the lower wishbone!
No comments:
Post a Comment